Threaded screw inserts for aluminum, magnesium alloys, and plastics require a clear substrate, stainless steel grade, locking type, and installation condition. Our DIN 8140 helical insert line supports thread reinforcement and repair, with 316L for specified temperature and salt-spray requirements and 304 as another stainless steel option.
Substrate and duty: match aluminum alloys, magnesium alloys, or plastics to thread reinforcement or repair requirements.
Material and environment: choose stainless steel 316L (A4) or 304 (A2) according to the specified strength, salt-spray, and temperature conditions.
Installation specification: identify the thread size, locking type, and M6 installation torque condition where applicable.
Standard checkpoint: include the DIN 8140 designation and the relevant material, strength, salt-spray, and temperature references.
Choose the DIN 8140 stainless steel helical insert when a tapped hole in aluminum, magnesium alloy, or plastic needs thread reinforcement or repair. The insert creates a permanent internal thread with vibration-resistant and anti-loosening performance for assemblies where repeated fastening could damage the parent material.
The application determines the first specification check. Train bogey bolt holes in rail transportation use the insert to help prevent fatigue stripping in aluminum threads. Magnesium alloy housing mounts in aircraft engines use it to reinforce threads against thermal creep. CT scanner titanium frame mounts are another listed application, where biocompatibility and non-magnetic interference matter. Match the product to the actual substrate and assembly duty before choosing a grade.
For a repair, identify the damaged thread size and parent material. For a new aluminum or magnesium component, state the required internal thread and the fastening condition. Plastic parts also require the plastic type and the way the fastener will be loaded, because the insert is intended for soft substrates rather than for every material or assembly.
The available grades are stainless steel 316L (A4) and 304 (A2). Specify 316L when the assembly requirement includes the listed strength, salt-spray, or temperature conditions. The 316L specification gives tensile strength of at least 700 MPa and neutral salt-spray resistance of at least 1,500 hours. Its operating temperature range is -200°C to +750°C when vacuum annealed.
Temperature and corrosion exposure should appear together in the purchase request. A buyer preparing an engine housing, outdoor assembly, or low-temperature installation can identify the operating condition and corrosion exposure, then request the grade that matches that duty. The word “stainless” alone does not identify the required version.
Choose 304 when the application specification calls for that grade. Choose 316L when the listed 316L conditions are part of the assembly requirement. Include the grade, substrate, thread size, and environment in the same line item so production and inspection teams are working from one selection.
The locking options are diamond knurl and pre-applied threadlocker. State the preferred option in the order specification instead of leaving the locking method open. The choice should follow the assembly requirement and the planned installation condition.
For an M6 substrate, the listed installation torque is 1.3 times standard torque. An M6 aluminum housing prepared for repeated fastening therefore needs the M6 thread size, substrate, locking type, and torque condition identified before the first production batch. A field repair needs the existing thread size and parent material recorded with the request so the insert is selected for the damaged hole.
These details also help separate a reinforcement order from a repair order. A new soft-substrate part needs the required thread and installation condition. A repair request needs the original hole information, the damage condition, and the replacement thread requirement.
DIN 8140 is the main designation for this product. The installation-torque entry references DIN 8140:2017, while the locking type references section 3.2 of DIN 8140. Material selection references ISO 3506, tensile-strength testing references DIN 50125, neutral salt-spray resistance references ISO 9227, and the operating-temperature entry references DIN EN 10204.
Put the DIN 8140 designation, stainless steel grade, substrate, thread size, locking type, and application conditions on the inquiry. For a special temperature or corrosion duty, add the required condition and quantity. This gives us the information needed to prepare the requested threaded screw inserts for the correct assembly context.
ISO 9227 is the reference tied to the neutral salt-spray resistance entry. The 316L specification lists at least 1,500 hours under that entry. If salt exposure is part of the assembly requirement, identify the 316L grade and neutral salt-spray condition together in the request, so the corrosion criterion is connected to the selected insert rather than treated as a general stainless-steel assumption.
The listed aircraft-engine application is a magnesium alloy housing mount. The insert reinforces the thread against thermal creep in that setting. Include the magnesium alloy substrate, thread size, operating temperature, stainless steel grade, locking type, and quantity in the inquiry. This application detail is more useful for selection than naming the industry alone because it connects the insert to the component and loading concern.
ISO 3506 is the material reference associated with the stainless steel grade. A 316L request can also identify the listed tensile strength of at least 700 MPa, which is tied to DIN 50125, when that value is part of the purchasing specification. Send the requested grade and the applicable inspection reference together with the substrate and thread size.
The DIN 8140 stainless steel helical insert suits soft-substrate thread reinforcement and repair in aluminum, magnesium alloys, and plastics. Select 316L for the listed temperature or neutral salt-spray conditions, or specify 304 when that grade is required. Send the substrate, thread size, grade, locking type, operating temperature, corrosion exposure, repair or new-part status, and quantity for a precise quotation.
The company
Handan Boen Fastener Manufacturing Co., Ltd. (Est. 2010) specializes in producing standardized industrial fasteners, including bolts, nuts, washers, and other essential components. We provide cost-effective for small and medium-sized buyers in industries such as automotive parts, agricultural machinery, and construction. Why Choose Us? No Quality Anxiety: ISO 9001-certified quality control + 100% inspection process, ensuring tensile strength tolerance within ±5%.…
About Us ↗Visit company website ↗Handan Boen Fastener Manufacturing Co., Ltd. (Est. 2010) specializes in producing standardized industrial fasteners, including bolts, nuts, washers, and other essential components. We provide cost-effective for small and medium-sized buyers in industries such as automotive parts, agricultural machinery, and construction.